×

Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

td

Member Since: December 5, 2008

Country: United States

  • Here's my dumb question - if I want to use this to drive a COM-00682 dual color 8x8 matrix, do I need 2 (one for each color), or just one? IIRC, there's 24 pins on the matrix. I'm talking individual LED control, not text.
    Ultimately, I need to figure out how to use 4 of those COM-00682s for 256 dual color LEDs, but fine getting started w/ one. Using an Arduino. Thanks.

  • I read the datasheet and comments, but still wonder if this is the right part for my application.
    I want to hook this up to switch power to a dc subpanel in my car. So I want this to close when I turn on the ignition (I have a switched wire to tap into), and when it closes, it completes a circuit of heavy wires hooked up directly to the battery. I see discussion about 5v and 12v to activate this relay, so that's really my question. Thanks!

No public wish lists :(