Arnon

Member Since: December 11, 2008

Country: United States

  • Product CEL-09607 | about 2 years ago

    Very good tip. Thanks! After struggling with the same issue for a few hours, I managed to do what you said, by using the Arduino itself as a serial adapter. 1. I removed the ATMega from the arduino. 2.connected the rx/tx pins on the arduino, to pins 2 and 3 on the sm5100 breakout board. 3. using a terminal program, connected at 115200 baud, and sent at+ipr=9600 4. disconnected and reconnected at 9600 - and - walla. I got the long expected +SIND sequence.

    Thanks, and I hope this will help someone else.

No public wish lists :(