avatar

finsprings

Member Since: December 11, 2008

Country: United States

  • Product TOL-10410 | about 3 years ago

    I have this but it never seems to stay stuck to any surface I use for more than a minute or so.
    I’d use it more if it would stay stuck to my bench…

  • Product DEV-08295 | about 4 years ago

    Just got an email from Kineteka that they’d updated their site with the 1.4 pinout:
    http://www.kineteka.com/PodBreakout-v1.aspx
    SparkFun: you should probably link to this page rather than pinouts.ru (pinouts.ru is correct for the numbering on the iPod but the PodGizmo v1.4 doesn’t match the proper numbering…)

  • Product DEV-08295 | about 4 years ago

    Be aware that the v1.4 of this board has the wrong silk screen. I contacted Mike at Kineteka after people trying my iPodSerial project couldn’t get it to work (I have v1.2 versions of this board). He said:
    “There is a slight difference in the v1.4 due to a manufacturing glitch.
    The boards still work the pinout is just flipped.
    The pins are odd /even as opposed to even / odd.. see below.
    Back side of dock connector v1.2
    02 04 06 08 10 12 14 16 18 20 22 24 26 28 30
    01 03 05 07 09 11 13 15 17 19 21 23 25 27 29
    Back side of dock connector v1.4
    01 03 05 07 09 11 13 15 17 19 21 23 25 27 29
    02 04 06 08 10 12 14 16 18 20 22 24 26 28 30
    So for instance the audio pins 3,4,5,6
    PodBreakout Pin V1.2 V1.4
    Right Line Out 3 4
    Left Line Out 4 3
    Right Line In 5 6
    Left Line In 6 5
    We are working on updating thehttp://www.kineteka.com/PodBreakout-v1.aspx page to reflect these
    changes should be up soon.”

No public wish lists :(