Member #553921

Member Since: May 13, 2014

Country: United States

  • after a while, i got the same error again. i thought maybe there is something related to power supply. so i soldered capacitor 0.1uF to VCC and GND near the pH circuit 5.0. for the time being, it works well..

  • check BNC to circuit wiring. BNC connector pinout is 1st reserved, 2nd PRB, 3rd GND.

  • i got the same problem. take a look at the BNC connector, 3 pins. 1st pin is reserved, 2nd @ middle is PRB, 3rd is GND. at first i thought the pin configuration is 1st PRB, 2nd and 3rd is GND.

No public wish lists :(