mikediv

Member Since: December 17, 2008

Country: United States

  • Product BOB-00494 | about 5 years ago

    The second I touched the pads with soldering iron 3 pulled right off, I used temp controlled soldering Iron on only 280 degrees and I was very careful I would not recommend this board I ended up using wire wrap to complete connections because the darn pads for the smt pulled right off

  • Product LCD-08799 | about 5 years ago

    guys if anoyne has gotten this display to work with a stamp or pic or anyhting and you are willing to share your methods could you please email me, I have had no luck what so ever getting this to work I have tried the prop chip and a basic stamp but I am stumped thanks mikediv@comcast.net

No public wish lists :(