Member Since: December 18, 2008

Country: United States

  • Remote uses the NEC protocol.

  • Well the LED works. Connected it to a Raspberry PI 0w and ran sudo i2cdetect -y 1 and the other 4 sensors I had connected showed up 0x44,0x45,0x60,and 0x77 but no 0x03. tried it again without the other sensors and nothing.

    Changed Pull Up resistors to 10k and tried it on another Raspberry Pi 0w... Seems to be working now.

  • Anyone have a copy of the firmware update? The link for it on this page doesn't work.

No public wish lists :(