Member Since: December 29, 2008

Country: United States

  • Early sighting of Merlin, the technowiz, training young patowans.

  • From the pictures, pins 1-4 are gnd, 3.3v, data out, and data in.

    on the RN-XV, pins 1-4 are 3.3v, data out, data in, and gpio 8. Gnd is on pin 10

    unless I'm missing something or looking at old documentation, they don't match

    EDIT: I think I found my mistake... it looks like the "first" PTH pin of GND isn't connected to the first pin in the 2mm socket, it's connected to pin 10 of the 2mm socket. I looked at the datasheet closer. :)

  • Looks like this isn't compatible with the RN-XV? :(

No public wish lists :(