Omi-kun

Member Since: January 24, 2009

Country: United States

  • Product DEV-09628 | about 4 years ago

    My bad. For some reason I thought Vin would supply power under USB power but it turns out that only works from an external power source. I’m using a Seeeduino.

  • Product DEV-09628 | about 4 years ago

    Just got the board and changed reset pin. The MAX_GPX define in the constants.h was commented out for some reason. Even when I uncomment it and change it to 7, I still get the following:
    Error: OSCOKIRQ failed to assert
    Circuits At Home 2010
    USB Host Shield QC test routine
    Press any key to continue…
    Reading REVISION register…Die revision invalid. Value returned: 00
    Test FAILED!!!
    Test Halted.
    0x55 pattern is being transmitted via SPI to aid in troubleshooting
    Press RESET to restart test
    I get the same thing again after a reset. Is my board defective? On Oleg’s blog it says it might be the oscillator that is giving the problem.

No public wish lists :(