×

With the recent surge in Omicron cases, shipping may be slower than stated times. We are working to build, ship and respond to everything as quickly as possible. Please see all COVID-19 updates here. Thank you for your continued support.

DennisFerron

Member Since: January 29, 2009

Country: United States

  • The 74HC595 object I wrote for the Parallax Propeller should work for this kit. The number of outputs the driver can control - 4 74HC595's / 32 lines is an exact match to the number in this kit, and it will allow you to do PWM on all of them independently.
    http://obex.parallax.com/objects/437/

  • Well you don't expect to get something for nothing do you?

  • Uh oh, my robot is quite capable of both hopping a curb and mowing down a few bushes (or small trees!). Maybe I better program the IR heat sensor to also make it avoid (cold) water!

  • The grey area at the 4 o'clock position in the aerial photo you provided of the parking lot looks suspiciously like water! Do you have a pond next to the parking lot? (I'm wondering if I need to add an "emergency water avoidance" protocol to the robot; or simply fill the cracks in the case with silicone so it'll float if it falls in.)

No public wish lists :(