Omar

Member Since: February 9, 2009

Country: Canada

  • Product COM-00681 | about 5 years ago

    Oops. Made a typo:
    “When looking at the PCB text (underneath the epoxy coating), pin one is located bottom left"
    This should read "bottom right”.

  • Product COM-00681 | about 5 years ago

    I am uncertain if this is product is still a mystery due to the lack of pinout information present in the datasheet. Even after searching, I couldn’t find much information on this.
    I spent some time tinkering with it and I think I’ve figured out the pinout. I am uncertain if the “YS” stamp is present on the same side of all of the modules (or if they are stamped randomly).
    On mine, pin one was present on the left-most pin when looking at the side with “YS” stamp (see picture):
    http://retfie.com/front.jpg
    I also took a picture of the underside to locate pin one based upon the PCB.
    When looking at the PCB text (underneath the epoxy coating), pin one is located bottom left (see picture):
    http://retfie.com/bottom.jpg
    If someone could confirm this is the case for all modules, it might help others, I think.
    -Omar

  • Product PRT-08811 | about 5 years ago

    Could someone please recommend a suitable enclosure for this or suggest ways of enclosing it?
    Thanks!

No public wish lists :(