Member #609079

Member Since: October 22, 2014

Country: United States

  • I would like to use this board to run the 3,3V inputs of the Tsunami PCB. The thing is that I would only need it to be uni-directional, converting a higher voltage to the lower 3.3V level. I wish to use this with a Eurorack Synthesizer system and unfortunately, the gate levels used by the different module makers vary anywhere from +5V to almost +12V. What High reference voltage (HV) should be plugged into the Bi-directional converter board that would allow it to work across a wide range of input voltages. Remember, I don't need to OUTPUT a HV level at all, just be able to connect a gate voltage there that may range between +5V to +12V and produce the 3.3V gate needed for the Tsunami.

No public wish lists :(