Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.



Member Since: October 27, 2014

Country: United States

  • How does this compare to the SparkFun 9DoF IMU Breakout - LSM9DS1 (part SEN-13284)?

  • Can this thing handle 6v (4x AA batteries)? I'm struggling to find a power source that will work for this and a Pololu Maestro board (whch needs 5v).

  • I just received the item, and the black plastic antenna housing is exactly 10 cm length. It rattles a bit, indicating the physical (metal) antenna is loose inside, but I don't see a way to open the black housing.

  • So... what are you supposed to use, then? I'm trying to find the right stand-offs for this CMOS camera: https://www.sparkfun.com/products/11745. The holes on the four corners of that camera are something like 2mm in diameter.

  • I have not noticed it getting warm at all. I have this connected to a 5.8GHz wireless transmitter, which does get warm, but not this camera.

  • Will this item work to transmit a USB signal (and is there an adapter cable, or I'd need to wire it myself)? OR do I need a different item, say https://www.sparkfun.com/products/9034 ? I want to transmit the USB output from a device like the Hauppauge USB-LIVE 2 (www.amazon.com/Hauppauge-610-USB-Live-Digitizer-Capture/dp/B0036VO2BI).

No public wish lists :(