Due to the impacts of the coronavirus outbreak, we are experiencing longer than normal lead times on certain products. We encourage back-ordering out-of-stock items to receive them as soon as possible.


Member Since: November 14, 2014

Country: Norway

  • Thanks!! really appreciate the help :)

  • Ahaa, thanks! I guess that makes sense considering the size of the cap, but that leaves me wondering why the BYP/4 pin is left open as this is also a noise reducing feature.

  • Looks like there's a small snafu on the schematic here: The voltage regulator MIC5219 is listed with two capacitors between the Vout pin and ground. I believe the C2 (1uF) capacitor should be connected between the BP pin and ground however, this to reduce noise on the outline.

    Ref. figure on the right on first page: http://www.mouser.com/ds/2/495/mic5219-253632.pdf

No public wish lists :(