s

Member Since: July 15, 2006

Country: United States

  • Product PRT-08249 | about a year ago

    This did not work with 1.2V rechargeable batteries. Needs 1.5V per battery.

  • Product BOB-00099 | about 4 years ago

    If you’re using 5v (which the device requires), the pullup resistor values given are wrong. The very minimum should be 1.5k. This might be why it doesn’t work with the ground pin connected (yes, that should be connected). If that doesn’t work, you have other electrical problems in your system.

No public wish lists :(