Users - Yosserg - SparkFun Electronics

What is the usable display size for this screen? (Dimensions were there are pixels.)

Is this display sunlight readable?

I’m interested in confirmation on the frequency, too.

For an example of how these displays can be used see http://www.instructables.com/id/Arduino-Watch-Build-Instructions/
Also the Tutorial by Jenny is out of date, the current library that works with Arduino’s can be found here. http://code.google.com/p/uoled-library/

Product LCD-08537 | about 4 years ago

The display will work with the 3.7v Li-Po batteries, see this instruction for a watch made with the display. http://www.instructables.com/id/Arduino-Watch-Build-Instructions/
Also the Tutorial by Jenny is out of date, the current library that works with Arduino’s can be found here. http://code.google.com/p/uoled-library/

Product SEN-08880 | about 5 years ago

I’ve put the sensor to use in the Drunkrina, an Arduino based ocarina that you have to be drunk to play. http://www.wooduino.com/2009/05/drunkrina-drinking-ocarina.html

Product SEN-08880 | about 5 years ago

Yosserg: My sensor was getting hot and not working too and then I realized I had the resistor in series with the B instead of the resistor connected to GND. Now it is running cool but still not working yet, maybe letting it bake out will fix that.
Working with it more I think it does need to be warm when it is running.

Product SEN-08880 | about 5 years ago

My sensor was getting hot and not working too and then I realized I had the resistor in series with the B instead of the resistor connected to GND. Now it is running cool but still not working yet, maybe letting it bake out will fix that.

Product BOB-00544 | about 5 years ago

Does this board work with the SDuFAT library for the Arduino?

Product DEV-09115 | about 5 years ago

Is there a diagram or instructions on how to switch to 3.3V? I see three very tiny pads on the back but don’t know what to do with them.