×
Hello and Welcome! If you have a technical question please check out our Forums. If you have an order or shipping question please refer to our Customer Support page. Please see all COVID-19 updates here and thank you for your continued support.
×
Please take our customer survey for a chance to win $1000 in SparkFun credit! We really appreciate the time you take to give us your extremely valuable feedback on how SparkFun can be its best - we couldn't do it without your input. Thank you!
XorLor
Member Since: March 5, 2009
Country: United States
-
Datasheet link is borken.
-
That range sounds about right if you're using two of these to communicate with each other. These will transmit 100m but you will need the external antenna version to receive the small signal at that distance. This large antenna works really well.
-
This guy I found makes custom cables and does a fantastic job.
-
Use:
gfx_Contrast(value) -
It's not very readable in direct sunlight. The OLED version that 4Dsystems makes is much brighter but they are smaller and more expensive.
-
Sweet! I better get a lab coat to go with the pocket protector, before they're all out of stock.
-
I went for the loyalty funds. Easiest $10 ever.
Thanks Sparkfun! -
Nice product!
A bit of advise for those who don't like to read datasheets...
If you are thinking about using this to charge LiPo batteries that are less than 500mAh (like some of the ones listed below in the related products), I would suggest replacing the 2k resistor with a greater one so the current is limited appropriately.
But like it says above, check the datasheet. You will find the current limiting equation there.
Also check the datasheet of the battery to see what the recommended constant charge current is. They have more useful advise there too:
"The batteries must be careful of proceed the operation for it's soft package."
"Short-circuit is strictly prohibited. It should damage batteries badly."
No public wish lists :(