×

SparkFun Electronics will be closed on November 26, 2020 and November 27, 2020 for the Thanksgiving holiday. We will begin normal operations at 9:00 AM Mountain Time on November 30, 2020.

×

Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

Member #65468

Member Since: March 28, 2009

Country: United States

  • So the the A111 was designed to work with an ARMv7 as a minimum and Sparkfun uses the Raspberry Pi 3 (and up) to interface it with. But the SparkFun RedBoard Artemis Nano has a Cortex M4 with ARMv7E-M, so as long as the correct pins are connected it should work?

  • Great project for a decent price! Question: what is the measuring envelope for this board as far as velocity? What about the minimum size of objects measured within 10-30cm from the sensor? Is the velocity envelope measurements software-based or requires hardware modifications (low-high bandpass filter) if the velocity is (for example) between 200-900 mphs?

No public wish lists :(