×

Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

Member #659233

Member Since: March 9, 2015

Country: United States

  • We couldn't get it to work on a different linux either. What would be the next step?

  • We installed dfu-util on my mates linux but to no avail. We will try today on a work computer with a different setup and see how it goes.

  • I am using the baseblock with the edison (I brought the starter kit).

    I pulled apart the kit just to have the edison and the base block. I have been trying to get it going on my mates linux (ubuntu) but it still wont boot past "Reached target rescue mode". The first two errors are fine now.

    We have been trying to reflash it off his linux but that is not working. noname@X220 ~/Downloads/toFlash % sudo ./flashall.sh 16:35:34 Using U-Boot target: edison-blankcdc Now waiting for dfu device 8087:0a99 Please plug and reboot the board (WE PLUG IN THE BOARD HERE BUT NOTHING HAPPENS UNTIL THE TIME OUT) Timed out while waiting for dfu device 8087:0a99 DEBUG: lsusb Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 005: ID 04f2:b217 Chicony Electronics Co., Ltd Lenovo Integrated Camera (0.3MP) Bus 001 Device 004: ID 0a5c:217f Broadcom Corp. BCM2045B (BDC-2.1) Bus 001 Device 003: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub DEBUG: dfu-util -l dfu-util 0.5

    (C) 2005-2008 by Weston Schmidt, Harald Welte and OpenMoko Inc. (C) 2010-2011 Tormod Volden (DfuSe support) This program is Free Software and has ABSOLUTELY NO WARRANTY

    dfu-util does currently only support DFU version 1.0

    Found Runtime: [0a5c:217f] devnum=0, cfg=1, intf=3, alt=0, name="UNDEFINED" Did you plug and reboot your board? If yes, please try a recovery by calling this script with the --recovery option [1] 22100 exit 254 sudo ./flashall.sh

    We are out of ideas atm so any advice would be greatly appreciated.

  • Hi, I am trying to log into the edison from my mac (yosemite). I get one of three errors when I enter the screen /dev/tty....115200 command:

    The first is a blank screen

    The second is an error - Cannot open line screen /dev/tty....115200. Then Sorry couldn't find a PTY. Both of these flash on the screen briefly.

    The third is an error "Reached target Rescue Mode" This last one happens after it looks like ubilinux starts up. There is also an output that says [FAILED] Load Kernel Modules.

    I am not sure what has happened, maybe the install did not work properly. Any ideas/help would be greatly appreciated.

No public wish lists :(