Member #669728

Member Since: April 6, 2015

Country: United States

  • How do I short the rst jumper?

  • Where would I put the video output cord in an arduino?

  • Does the knock have to be on the piezo element or just on the same surface?

  • veAlso is there an easier way to make designs than doing this LCD.setPixel(x,y,1); for every pixel?

  • What would be the best way to secure it in place since the top two screw holes are cut in half?

  • how would I fix the screen that when i run this program displays two dots or displays nothing

    include <SoftwareSerial.h>

    include <serLCD.h>

    // Set pin to the LCD's rxPin int pin = 2;

    serLCD lcd(pin);

    byte dot[8] = { B00000, B00000, B00000, B00000, B00000, B00000, B00000, B01000, };

    void setup() { lcd.createChar(1, dot); lcd.clear(); }

    void loop() { lcd.printCustomChar(1); while(1);

    }

  • I made this program but the serial lcd displays two dots not one or sometimes it displays nothing. I have this Serial LCD

    /

    include <SoftwareSerial.h>

    include <serLCD.h>

    // Set pin to the LCD's rxPin int pin = 2;

    serLCD lcd(pin);

    byte dot[8] = { B00000, B00000, B00000, B00000, B00000, B00000, B00000, B01000, };

    void setup() { lcd.createChar(1, dot); lcd.clear(); }

    void loop() { lcd.printCustomChar(1); while(1);

    }

No public wish lists :(