George6

Member Since: April 13, 2009

Country: United States

  • Tutorial - microSD Shield Quickstart Guide | about 4 years ago

    I have a Mega board, and the only way I have been able to get the shield to function is to jumper pins on the mega 53(SS),51(MOSI),50(MISO),and 52 (SCK) to the shield pins 8(SS), 11(MOSI), 12 MISO, and 13 (SCK).
    I believe that there are another set of pin definitions in ArduinoPins.h near line 22 that may need to be changed for the mega, however making that change. I still could not get the shield to function.
    On the Mega pins 2 - 13 are label PWM how do I change them to digital so that I can get the sheild to function with out the jumpers?
    Thanks

No public wish lists :(