×

Our Technical Support team will be out of the office on Wednesday, April 23 starting at 12pm. Tech Support will reopen with normal hours on Thursday, April 24 at 9am. Thank you

MrKiss

Member Since: April 25, 2009

Country: United States

  • Product SEN-10955 | about 2 years ago

    Yes. I was in ‘0x39 problem’ too Default ‘#define SA0 0’ setting in program is wrong. It should be 1 not 0. And the schematic is wrong too. It tells ‘SA = 0’ is default but it’s not true.

    Hey Sparkfun guys please correct it.

No public wish lists :(