×

Our Technical Support team will be out of the office on Wednesday, April 23 starting at 12pm. Tech Support will reopen with normal hours on Thursday, April 24 at 9am. Thank you

zayour

Member Since: April 28, 2009

Country: United States

  • Product LCD-00569 | about 4 years ago

    dear i got one too and same problem.But after searching and waisting days i found that the pin numbering on lcd is wrong, pin 1 is 10 and pin 10 is 1.so inside of pin 10 this is pin 1 which is vcc pin 9 is pin 2 which is reset and so on. hope to be helpfull

  • Product LCD-08600 | about 4 years ago

    Dear ebarajas;
    I am using same LCD with atmega8 but nothing work. if it works with u can u plzz give a little help.if u can give me code or something even it is PIC i can translate it thanxxx.
    zai3our@hotmail.com

  • Product LCD-00569 | about 4 years ago

    i got one from that little LCD. its EPSON controller and i went on interfacing with it. till now no code or any firmware succeeded. plzzzz help! till now my lcd is black what i should do? i am interfacing with atmega8L.10x for help.

No public wish lists :(