×

Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

JPB

Member Since: June 5, 2015

Country: United States

  • FYI, The hookup guide is wrong when it says that the power supply is in the range of 3.6V and 5.0V, if you look at the datasheet for the 3V-TO-39 package it actually says that the range is 2.6V to 3.6V which may be good news for most.

  • Hello, were you able to make the gesture sensor APDS9960 work with the Arduino Pro Mini 3.3V? I have the same issue that you had 4 months ago. I think it is something related to the interrupt pin 2.

  • I agree, all these IoT boards that are coming out from different vendors; none of them are the complete solution. This one from SparkFun comes close but it is only missing two things: 1. A EEPROM where you can store the SSID and Password. 2. Means to update the firmware over the air.

No public wish lists :(