Member #70671

Member Since: May 17, 2009

Country: United States

  • Hi all again.
    I tried differen method to make this module work.
    When I was touch regulator I found it becoming very hot.then after measure between vdd pin 21 and ground I found there was a short circuit..which mean it is corrupted.That mean no internal protection inside this module.
    Why there is nothing to inform the client about this module.
    It is difficult to make it work.
    till now even I read carefully manual I could not make it works.
    when i make search on the wifi devices using my pc i could not find.
    really it becoming me to dissappointment.
    Please any one can make it working provide mme with solution for this module.
    with my pleasre

  • Hi every one
    I just received this device
    and sloldering it
    but likely the pins were broken this is the first problem
    Pins easily removed even though my solder was smooth and I have good exprience.
    Second I want to ask just to make it works,only connect vdd pin 21 and ground or there are should be other pins,also are there any led indicator to show there is power on this device??
    thank you

No public wish lists :(