Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.
Member Since: September 8, 2015
Country: United States
News - Enginursday: Spotify Albu… about 2 years ago
This would make a great add-on for a bluetooth speaker!
News - Enginursday: Light Up You… about 3 years ago
Thank you for your work on the enclosure plugin! By far the most useful plugin for Octoprint, IMHO.
News - Enginursday: Light Up You… about 3 years ago
I added a strip of LED's to my LulzBot mini, controlled via Raspberry Pi running Octoprint with the enclosure plugin. The LED's turn on automatically at the beginning of the print and shut off when the print is finished. With the Pi camera, it makes remotely monitoring prints at any hour a breeze.
News - Prepare Your Pranks! Hard… about 3 years ago
You could really go covert by cracking the computer case and connecting up to an unused USB header on the motherboard with a cable off from one of these: https://www.digikey.com/short/qpvd1v
News - Enginursday: Levitating L… about 4 years ago
For those without a bench frequency generator, would you have any suggestions in regards to using either the Frequency Generator Kit - FG085 (KIT-11394) or SparkFun MiniGen - Pro Mini Signal Generator Shield (BOB-11420) to generate the square wave?
No public wish lists :(