GaretBiglow

Member Since: June 2, 2009

Country: Canada

  • Product LCD-11987 | about 6 months ago

    +1 Serial Interface!!!!!!!!!!!

  • Product COM-11181 | about 6 months ago

    +1 for preloaded bootloader!

  • Product DEV-10524 | about 11 months ago

    Is it possible to:

    1. Remove ATmega328 from an existing UNO board
    2. Stick in a NON-BOOTLOADED ATmega328 into the UNO board
    3. Burn a bootloader (optiboot) to the NON-BOOTLOADED ATmega328
    4. Pull the chip out and use it in a circuit (provided that a clock and 5V source is provided)

    Please let me know Sparkfun if this is possible. I promise I will order a whole bunch of 328’s!

  • Product DEV-10524 | about 11 months ago

    Yes! I want to know if this is an option as well.

    Also, is it possible to: 1. Remove ATmega328 from an existing UNO board 2. Stick in a NON-BOOTLOADED ATmega328 into the UNO board 3. Burn a bootloader to the NON-BOOTLOADED ATmega328 4. Pull the chip out and use it in a circuit (provided that a clock and 5V source is provided)

    Please let me know Sparkfun if this is possible. I promise I will order a whole bunch of 328’s!

  • Product LCD-00461 | about 5 years ago

    You’ve gotta code left to right scrolling, but thats not too tough

No public wish lists :(