Member #733739

Member Since: October 28, 2015

Country: United States

  • I agree with your concussion that the 8 Second Response Time is the time the sensors take to respond to an increase or decrease in the temperature or humidity.

    Per the docs, “… SHT1x should not be active for more than 10% of the time – e.g. maximum one measurement per second at 12 Bit accuracy shall be made …”

    So if the SHT15 takes 320 milliseconds to process a 14 bit measurement then you “should not” poll more than ONCE every 3 seconds to maintain 10% On-Time and 90% Off-Time requirement. Do not POLL 3 times per second.

No public wish lists :(