syegg

Member Since: June 13, 2009

Country: United States

  • Product SEN-08739 | about 5 years ago

    Fredjikrang: Sorry I didn’t see your question earlier tomhak!
    You need to be sure to connect the ground in the video cable. (There are two wires in the cable. The individually shielded one is the signal, the other is ground. They must both be connected.)

    hi, sorry for ignorance. newbie here. I did bought this camera for a wireless project. There is 3 wires from the camera, Black and red i had soldered to a 9V battery connector, and the Yellow wire, i solder it to the bottom of my wireless transmitter(Video port), however, my receiver did not received any signal from my transmitter. Which step i had did wrongly? I don’t really understand how to use the RCA cable to connect to the video wire.You need to be sure to connect the ground in the video cable. (There are two wires in the cable. The individually shielded one is the signal, the other is ground. They must both be connected.) Pls advice

No public wish lists :(