June 20, 2009
about 2 years ago
Two for one sale!
about 3 years ago
It’s been brought to our attention that trying to program the 4D screens using an FTDI breakout can damage the driver. You’ll need to use the FT232RQ USB to Serial which you can find in the related items below. Why?
about 6 years ago
All you need is a momentary switch to Ground on the Identify, Enroll and Delete lines.
I’m using a Pic12F675 as a way to increase the 500msec Success pulse to 5 seconds.
When you press the identify switch the scanner then comes on and look for a fingerprint to scan.
This works great. Very easy to use. I have it connected to a shotgun lock I bought.
No public wish lists :(
Forgot your password?
No account? Register one!