Member #75547

Member Since: July 7, 2009

Country: United States

  • Just a heads up to anyone trying to run the Arduino example. Make sure you plug Vcc into the 3.3V output on the arduino board. I also had to change the line

    “ LcdWrite(LCD_C, 0x14 ); // LCD bias mode 1:48. //0x13 ”


    “ LcdWrite(LCD_C, 0x12 ); // LCD bias mode 1:48. //0x13 ”

    Otherwise the screen was completely dark and unreadable.

No public wish lists :(