blinka

Member Since: July 15, 2009

Country: United States

  • Product BOB-08276 | about 5 years ago

    I read these comments, and thought to myself, “I’m going to screw this up”, especially since I’ve just started to learn how to solder. I was surprised after wards (having soldered in both the headers and the 2mm sockets) that every thing connected just fine, and continuity testing with a DMM confirmed that all the connections were made. I do admit that I did error on the side of too-little solder and therefore some of the joints may not be as strong as they should be, but I suspect it will be fine.

No public wish lists :(