Due to the impacts of the coronavirus outbreak, we are experiencing longer than normal lead times on certain products. We encourage back-ordering out-of-stock items to receive them as soon as possible.


Member Since: July 26, 2009

Country: United States

  • Here are the commands to update the firmware under Linux. Note you might have to update the file names, assuming newer firmware. This was done with the Sparkfun AVR Pocket Programmer, Fedora 19. When connecting the programming ribbon cable the red stripe will on your left when looking at the back of the FG085, for both U5 and U6.

        sudo avrdude -F -b 9600 -c usbtiny -p m168p -U flash:w:113-08501-130.hex
        sudo avrdude -F -b 9600 -c usbtiny -p atmega48 -U flash:w:113-08502-050.hex 


    Everything flashes OK, boots fine, but no output.... I'll report back when I get it figured out.

  • Thanks for the heads up. I called, no stock.

  • Thank you for pointing this out, works very well.

  • Please build an analog input version with 12bit resolution as well!

  • tdma: Now what Microchip does need is MPlab for mac and linux !!
    Absolutely, Linux support is essential for any project of mine!

No public wish lists :(