×

Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

Member #80830

Member Since: August 30, 2009

Country: United States

  • What would be really nice if the CTS was replaced by the RTS. Or at least a jumper to allow it to be changed. Then an auto reset like the ThingDev could be used to program the ESP8266 boards with the Arduino IDE. Or even better a board with the auto-reset built in, such that the ESP8266 RESET AND GPIO0 connect where the DTR and CTC are now!

  • I have a crimper from below link, best crimper for the jst ph contacts i have found

    http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=34109

No public wish lists :(