Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.


Member Since: September 21, 2009

Country: United States

  • A more simple solution if you are actually sewing this ribbon into the fabric you can just put an extra piece of fabric between any areas that overlap... :)

  • For anyone needing it you can follow the Keypad tutorial and get the library here: http://www.arduino.cc/playground/Code/Keypad
    And if you want to use the example sketch they provide on the page you would connect the keypad as follows
    Looking at the top of the keypad (key side) with the pins at the bottom from left to right you have pins 1-9 with pins 1 and 9 being null (not connected)
    Ard - Keypad
    2 - 5
    3 - 7
    4 - 8
    5 - 3
    6 - 6
    7 - 2
    8 - 4

No public wish lists :(