With the recent surge in Omicron cases, shipping may be slower than stated times. We are working to build, ship and respond to everything as quickly as possible. Please see all COVID-19 updates here. Thank you for your continued support.

Jonathan W

Member Since: October 1, 2009

Country: France

  • At $29, I'm incredibly surprised you didn't include the NTC on the board. Seriously, they cost like $0.10, and the pin seems to be reserved for the NTC exclusively.

  • As far as i can tell, there is no Black and White mode....

  • Hi,
    I also have problems getting them stay in the 830-pin Pololu breadboards (http://www.pololu.com/catalog/product/352)
    They do fit fine the wrong way around (ie the flat sides of the pins parallel to the connected lines), but then they're useless since they're always on...
    Would be ok across the divide, but the divide is too wide (4 steps)
    My solution: straighten the pins (not enough on it's own as noted by others), then rough them up by plating them with solder
    HTH, Jonathan

No public wish lists :(