×

Our Technical Support team will be out of the office on Wednesday, April 23 starting at 12pm. Tech Support will reopen with normal hours on Thursday, April 24 at 9am. Thank you

RyanElm

Member Since: October 12, 2009

Country: United States

  • Product SEN-00251 | about 3 years ago

    This is a k rated sensor, however the probe tip is a tiny affair, it’s the bit on the end of the insulation. On kiln temp sensors the tip is several inches long, this allows it to be inserted through the kiln wall without exposing the insulation to excessive heat.
    You can find ones designed for kilns by searching “k temperature probe” on google

No public wish lists :(