Hello and Welcome! If you have a technical question please check out our Forums. If you have an order or shipping question please refer to our Customer Support page. Please see all COVID-19 updates here and thank you for your continued support.
Track My Order
Frequently Asked Questions
International Shipping Info
Mon-Fri, 9am to 12pm and
1pm to 5pm U.S. Mountain Time:
November 4, 2016
News - Enginursday: Digital Hand…
about 4 years ago
Thank you for your reply. I have my handpan working now. The culprit was a simple wiring error. Now for packaging...
I've just finished wiring this up but I'm not getting any audio out of it. I tested the audio board with a guitar example and that worked.
From the handpan's code, I wired the up/down scale pushbuttons with one side going to pins 2 and 3 respectively and the other side of each switch going to the ground pin. The pots are wired to 3.3v on the high-side and ground on the low, with the wipers going to pins 20(A6) and 21(A7). Am I missing something here?
No public wish lists :(