sparkplug781

Member Since: October 19, 2009

Country: United States

  • Product DEV-08171 | about 4 years ago

    Does this allow for serial bootloading out of the box, or do you need to purchase the JTAG programmer to load programs into the FLASH memory? What programming IDE works best with this line of microcontrollers, TI’s Code Composer Studio?

  • Product GPS-00177 | about 4 years ago

    Check in the datasheet… I had seen it in there on the second page…

  • Product COM-00314 | about 4 years ago

    Does it matter that your schematic differs from the datasheet? I always thought that the emitter of an NPN transistor always was connected to ground. Like in the datahseet, this would give an inverted output to the input signal. Since this device does not have an external base to drive, will it work (or has it been tested) with the schematic posted with this part?
    Thanks in advance.

No public wish lists :(