tomorrow_today

Member Since: October 24, 2009

Country: United States

  • Product PRT-11662 | last year

    Mini breadboards don’t mate with the small breadboard :(

  • Product PRT-11658 | last year

    Mini breadboards don’t mate with the small breadboard :(

  • Product DEV-09219 | about 4 years ago

    …and this is why Sparkfun rocks. Thanks for your fast response.

  • Product DEV-09219 | about 4 years ago

    Oops, there are some resisters and diodes to add too, but I would definitely buy the board if I could plug in my Xbees directly instead of through a shield or explorer board.

  • Product DEV-09219 | about 4 years ago

    The Arduino Pro has considerable space on the pcb that can be used to upgrade its functionality without increasing the cost of the board. Although there are many similar things that can be done, I suggest using the empty space to put in the connector space for an Xbee socket and run a couple branches for the rx and tx. If, you’re really feeling saucy you could even throw in holes and traces for jumpers or switches to change which digital pins the Xbee communicates on.

No public wish lists :(