×

Forget something during Black Friday/Cyber Monday? Check out the Week of Deals!

Member #879970

Member Since: December 17, 2016

Country: United States

  • A few issues with mine: - Pulling EN low is still outputting ~ 1V on the output. - Setting voltage jumper to 3.3V is only outputting 3.18V - Charge current is ~ 50mA, not the stated 100mA Is the device broken or is this to be expected?

  • Set to 3.3v via jumper. Output voltage reading as 3.18V. Charging current reading only 50mA and 4.1V. Seems defective to me.

No public wish lists :(