Member #88657

Member Since: November 2, 2009

Country: United States

  • Product LCD-08858 | about 3 years ago

    Hi Member61614
    You need to connect the serial port of your computer to the console port of the BlueScreen (UART0 Tx and Rx Pins are mapped there) using a MAX232 or similar chip to drive the RS232 voltage levels. The USB port is not programmed to be used as an ISP by default (UART0 is).
    I am using the USB port to power the unit and the console port to program it.
    Hope it helps ..

No public wish lists :(