We are still shipping! However, order processing may take longer than usual and we cannot guarantee same day shipments due to staffing guidelines from the CDC. Please see all COVID-19 updates here. Thank you for your continued support.
Track My Order
Frequently Asked Questions
International Shipping Info
Mon-Fri, 9am to 12pm and
1pm to 5pm U.S. Mountain Time:
Chat With Us
January 15, 2017
Tutorial - ZX Distance and Gesture Sensor Hookup Guide
about 4 years ago
Maybe i should use additional 10k pull-ups resistors or open the I2C Pullups jumper to disconnect pull-ups on sensors?
about 4 years ago
I want to send some data from arduino to computer using this shield. Do you have any hints or example how I can do that? There are many examples for communication with other devices like android but I can't find any with PC
Yes I2C Addr on one sensor is closed and I tested with 2 Arduinos. When SDA and SCL lines of both sensors are connected to one Arduino (Arduino Mega ADK) and one sensor is supplied by that Arduino Mega ADK and second sensor is supplied by Leonardo everything works fine. I want to connect SDA, SCL, VCC, GND lines of both sensors to one Arduino, but this configuration makes problem with unstable results.
Yes, I move sensors farther apart, also I cover diodes from one sensor and check values from the other and problem still exist
Hi, I have problem when I try to use 2 sensors in game pong. When sensors are connected to one I2C bus but supplied from 2 Arduinos everything works fine. The problem is when I try to supply them from one Arduino, results are unstable, they change, although my hand is at the same position. I thought that maybe one Arduino can't provide enough current but I measured that this is not the cause.
No public wish lists :(