Member Since: November 21, 2009

Country: United States

  • OWW ! I poked my eye out %#%$$@# I think the whiskers should have loops on the ends for safety.

  • Just make sure everything else is.

  • So now we are sewing 110 volts into our clothing. Brilliant. Just don’t spill any drinks on yourself. Having said that, I can imagine a really good arc reactor made from this.

  • It won’t do SPI, and the compiler does not support double precision – the 16-bit integer arithmetic can be very limiting so don’t use it where you need wide ranges of numbers unless you want to write some double-precision routines yourself.

  • I’m sorry, but we already hired the giraffe.

  • Can I ask, what is the diameter of the head of the extention shaft? I have an enclosure that uses torx bolts that are deeply recessed in holes, and the holes are only .38". I wouldn’t want to buy this wrench only to find out it won’t fit down into the recess holes.

  • Thank you, thank you, thank you! I had looked for these connectors at DigiKey under the SamTec designation of SFC-115, with no luck. Digikey’s shipping cost beats SamTec’s any day. It would be great if SparkFun carried the connectors also, considering they already carry the SamTec connector for the Lassen IQ GPS receiver.

  • Here’s an example of a project using this touchscreen unit:

  • You can use one of these:
    or one of these:

  • You can also use a PropPlug from Parallax to program it, that’s what I use. But it does not supply power to the unit, so you have to have an external 5v line.

No public wish lists :(