×

SparkFun Electronics will be closed on November 26, 2020 and November 27, 2020 for the Thanksgiving holiday. We will begin normal operations at 9:00 AM Mountain Time on November 30, 2020.

×

Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

Member #91718

Member Since: November 24, 2009

Country: United States

  • I have emailed tech support and have gotten the issue resolved. I've also updated my comments to be more appropriate to the root issue. You might make a note in the item desc that you can't update the firmware with this block and thus you cannot use it as a starting point if you don't own either a "base" block or "arduino breakout board".

  • EDIT: NOTE: Make sure you get the "BASE" block NOT the "CONSOLE" block or you will NOT be able to update the Edison firmware OR upload any programs unless you have the "Arduino Breakout board"!

  • EDIT: NOTE: Make sure you get the "BASE" block NOT the "CONSOLE" block or you will NOT be able to update the Edison firmware OR upload any programs! If you don't have the "Arduino Breakout Kit" you cannot start out with this board like it says in the desc.

  • Why is the OLED monochrome? The device has 1GB of ram. I could store a full 32-bit double-buffered surface for this thing. Are there color screens for this in this form factor?

No public wish lists :(