dotMusclera

Member Since: November 25, 2009

Country: United States

  • Product TOL-10553 | about 3 years ago

    In researching tips for the Radio Shack Digital/AT201D I found that the 900M tips (AT201D compatible) were replaced by the T18 series. Hakko’s site notes this and lists compatibility:

    http://www.hakkousa.com/detail.asp?PID=4801&Page=1

    This tip is used with the following Hakko Soldering Stations and Systems:

    Hakko FX-888 Soldering Station
    Hakko 913 ESD Safe Fume Extraction Iron (Requires a Fume Extraction System)
    Hakko 907 Soldering Iron
    Hakko 907-ESD Soldering Iron
    Hakko 900M Soldering Iron
    Hakko 900M-ESD Soldering Iron
    Hakko 928 Soldering Station
    Hakko 936 Soldering Station
    Hakko 936-ESD Soldering Station
    Hakko 937 Soldering Station
    Hakko 703 Soldering Station

  • News - Digital Compass Info Vide… | about 4 years ago

    Nice demonstration. However, I’m wondering what happens when you flip the board. Obviously your heading would be wrong for a 2-axis magneto, but does a tilt compensated 3-axis take care of this automatically?

No public wish lists :(