Member #94013

Member Since: December 2, 2009

Country: United States

  • Can someone help me? I want the scale data to display on a 16 x 2 LCD Display using the Sparkfun SerLCD board using the Serial Out ports on the OpenScale board. I've connected the TX on the OpenScale to the RX on the SerLCD. I've tried the basic "Hello World" sketch using the SoftwareSerial library. I don't know what the pin out is. I tried a few combinations, based on what I thought the the ATmega schematic said, but no luck. I'm connecting via USB to power the board. I thought that might be an issue, but connecting from a battery pack with a USB connector didn't work either.

    I have my own custom sketch for the OpenScale, which works fine over USB serial. I just want that data to display on the LCD.


No public wish lists :(