×

It is that time again! SparkFun Electronics will be closed Friday, January 13th for our annual inventory day. Please keep in mind that any orders placed after 2PM (Mountain Time) on Thursday, January 12th will not ship or be prepared for local pickup until we open for normal operations on Monday, January 16th. In addition, tours will resume on Friday, January 20th. Thank you for your patience!

Member #95092

Member Since: December 7, 2009

Country: United States

  • sentryGun53 :

    1) launch SirfDemo

    2) select Setup/data, choose the COM port

    3) select Action/Synchronize protocol & baud rate

    4) select Action/initialize data source,check Factory reset

  • Measured with an MSO-28 USB scope, the PPS pulse is 1.1 µs wide and 2.8 V high.

    In NMEA mode, the module work fine at 57600 baud :

    $PSRF100,1,56700,8,1,0*36

    and at 115200 baud too:

    $PSRF100,1,115200,8,1,0*05

No public wish lists :(