All that's needed to complete the project is to connect three wires from the Arduino to the PowerSwitch Tail II. For cleanliness we can use a 3 lead wire like this: http://docs.spacebrew.cc/tutorials/2013/2/6/power-switch-tail-contorl-any-ac-electrical-device-remotely-via-spacebrew
I can source a wire like this at JK Electronics for literally a few dollars.
Product | Subtotal | Qty | |
---|---|---|---|
PowerSwitch Tail II
COM-10747 |
57.9 |
2
Cannot be ordered at this time. |
|
Arduino Uno - R3
DEV-11021 |
55.2 | 2 | |
USB Wall Charger - 5V, 1A (Black)
TOL-11456 |
9 | 2 | |
USB Cable A to B - 6 Foot
CAB-00512 |
9 | 2 | |
Total: 131.1 |