Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
MUX 2 Click is a Click board™ that switches one of the eight inputs to one output.
TIMI-MB (mikroBUS™) is a 0.96” TFT LCD display module that is driven directly by a PIXXI-28 graphics processor from 4D La…
RS485 Click 3.3V is a RS422/485 transceiver Click board™.
MCP251863 Click is a compact add-on board representing a complete CAN solution used as a control node in a CAN network.
ADC 8 Click is a high precision, low-power, 16-bit analog-to-digital converter (ADC), based around the ADS1115 IC.
MIKROE ADC Click carries the MCP3204 12-bit Analog-to-Digital converter.
4D - Display Click is an adapter Click board™ that offers a mikroBUS™ interface for controlling 4D Systems gen4 Series in…
PS/2 Click is a cost-effective solution for adding keyboard and mouse connectivity to your design.
ADC 7 Click is an advanced 32-bit analog to digital converter (ADC) which uses the LTC2500-32, a 32-bit oversampling SAR ADC.
MCP2542 Click uses the MCP2542WFD, a CAN FD transceiver IC with Wake-Up Pattern (WUP) option, from Microchip.
ADC 4 Click is an advanced analog to digital multichannel converter.
This module allows a designer to leverage the Raspberry Pi hardware and software stack in their own custom systems and form f…
Arduino MKR Click Shield is the perfect way to expand the functionalities of your development board compatible with Arduino's…
This is the Add-On kit for the SparkFun Digital Sandbox (DS) learning platform. With this add-on you will be able to perform …
It’s a compact and easy solution for adding SPI serial communication via USB cable.
Access to online knowledge library, self-paced training modules and online support desk, live support for product troubleshoo…
Live (online) Inclusive Computer Science teacher training and in-depth training on implementing Project Based Learning in the…
Arduino Nano Click Shield is the perfect way to expand the functionalities of your Arduino Nano board.
Serializer Click is a compact add-on board that contains a digital input translator/serializer.
The Click communicates with the target MCU through the UART interface and runs on a 3.3V power supply.
It’s a compact and easy solution for adding 4-to-20mA industry standard communication protocol to your design.
ADC 18 Click is a compact add-on board that contains a high-performance data converter.
Silabs Click Shield is the perfect way to expand the functionalities of your Silicon Labs Thunderboard™ family.
MIKROE 4-20mA R Click is an add-on board in mikroBUS™ form factor which serves as a receiver in a 4-20mA current loop stand…
Opto 3 Click is a relay Click board™, equipped with two pairs of optically isolated solid-state relays (SSR).
mikroBUS Shuttle is a small add-on board, which is intended to be used with Shuttle Click, in order to expand the mikroBUS™…
DAC 8 Click is a compact add-on board that contains a fully-featured, general-purpose voltage-output digital-to-analog conver…
Secure 8 Click as its foundation uses the ATECC608B, a cryptographic coprocessor with secure hardware-based key storage from …
The micro:bit Click adapter is equipped with two proprietary mikroBUS™ sockets, allowing all the Click board™ devices to …
A universal programmer and debugger for ARM® Cortex®-M, RISC-V, PIC®, dsPIC, PIC32, and AVR over USB-C.
MCP2517FD Click is a compact add-on board representing a complete CAN solution used as a control node in a CAN network.
AN to PWM 2 Click is based on the LTC6992CS6, a voltage-controlled PWM generator from Analog Devices.
USB UART 2 Click provides USB isolation and carries the ADUM4160BRWZ USB port isolator.
Secure 2 Click carries the ATAES132A, a cryptographic coprocessor with secure hardware-based key storage from Microchip.
Shuttle Click in combination with mikroBUS Shuttle provides an easy and elegant solution for stacking multiple Click boards…
RS485 4 Click offers an UART to RS485 signal conversion, featuring the ADM2795E specialized IC with the complete galvanic iso…
Arduino Mega Click Shield is an extension for Arduino Mega and any other boards that share its pinout.
RS232 3 Click is a compact add-on board representing a universal usable RS232 transceiver.
This adapter supports the mikroBUS™ Click socket with a MatesBUS interface to connect products of any TIMI model directly t…
RS485 3 Click is an RS422/485 transceiver Click board™, which can be used as an interface between the TTL level UART and th…
The Dual LIN Click is a Click board™ based on the TLE7268SKXUMA1, a Dual LIN transceiver from Infineon.
Secure 4 Click includes the ATECC608A, a secure CryptoAuthentication™ device from Microchip.
Atmel's ATmega328P 8-Bit Processor in 28 pin DIP package. It's like the ATmega168, with double the flash space. 32K of progra…
MCP2003B Click is a mikroBUS™ add-on board with a bi-directional LIN transceiver.
MCP25625 Click is a mikroBUS™ add-on board carrying a Microchip CAN controller with an integrated transceiver.
The pi-top is a DIY laptop you build yourself that helps you start learning how to code, create awesome devices and take your…
DAC 7 Click carries the AD5624R, a low-power four-channel, 12-bit buffered Digital-to-Analog Converter.
