Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
Solenoids are a great way to induce linear motion for pushing, pulling or controlling switches and levers. This smaller solen…
A 3-phase DC brushless DC motor has the unique capability of being both a high efficiency, high torque, very smooth motor, a…
The uArm Swift Pro is a high grade desktop robotic assistant that can be utilized in many more applications than its predeces…
The SparkFun Inventor’s Kit for RedBot is a great way to get started with two motor robotics and sensor integration using t…
These gearmotors require a voltage of 4.5V with a no load current of 190mA while possessing a gearbox ratio of 48:1.
This vacuum pump really sucks! This pump operates at 12V and has enough suction for most small projects. We even used one to …
The 915MHz SiK Telemetry Radio V3 is a lightweight and inexpensive open source radio platform that can allow for ranges of 30…
Utilize this kit to turn your Jetson Nano into a mobile machine with things like object following, collision avoidance via th…
Turning off backorders - supply of main IC is delayed until July 2022.
The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V or 0 to 3.…
This is our new Hobby Motor now with a 6mm, 10 tooth, gear to make your basic projects a little simpler to manage. It works w…
This gearmotor requires a voltage of 4.5V with a no load current of 190mA (max 250mA) while possessing a gearbox ratio of 120…
This is a simple, but very powerful stepper motor with a 4-wire cable attached. This is a [Bipolar](http://en.wikipedia.o…
The Big Easy Driver, designed by [Brian Schmalz](http://www.schmalzhaus.com/), is a stepper motor driver board for bi-polar s…
Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is very similar in size and specifi…
The TMC6300 from Trinamic is a powerful, yet easy to use three phase brushless DC (BLDC) motor driver. Separate high side and…
The SparkFun Servo Trigger is a small robotics board that simplifies the control of hobby RC servo motors. When an external s…
Arduino Braccio ++, the revolutionary, eco-friendly arm-evolution of the Tinkerkit Braccio robot.
Combining the micro:bit with the SparkFun moto:bit carrier board creates a flexible, low-cost, Qwiic-enabled robotics platfor…
These are a pair of hobby gearmotors from DAGU. These gearmotors are the same ones recommended for use in the Shadow Chassis …
The Pixhawk® 6C is perfect for developers at corporate research labs, startups, academics (research, professors, students), …
The Ardumoto Shield is a dual-motor controller for Arduino. Based on the L298 H-bridge, the SparkFun Ardumoto can drive two D…
The SparkFun Qwiic Motor Driver takes all the features of the Serial Controlled Motor Driver and miniaturizes them, adding Qw…
This is the Wheel Encoder Kit from DAGU, a simple add-on to any wheeled robot that can help measure the speed or distance the…
This is a 3 wire slip ring, a remarkably simple electromechanical assembly that allows for electronic signals and power to be…
This is a 6 wire slip ring, a remarkably simple electromechanical assembly that allows electronic signals to be passed throug…
Solenoids are a great way to induce linear motion for pushing, pulling or controlling switches and levers. According to the d…
These steppers are a great way to get things moving, especially when positioning and repeatability is a concern. This is …
This motor requires a voltage between 3-9V, has a gearbox ratio of 1:48 and a speed of 90RPM at 4.5V.
Here is a powerful, low-cost, reliable servo for all your mechatronic needs. This servo is able to take in 6 volts and delive…
A compact metal magnetic antenna mount.
Control up to two DC motor outputs at a constant current of 1.2A. Utilize up to two input signals and four function modes: CW…
The SparkFun Line Follower Array is a long board consisting of eight IR sensors that have been configured to read as digital …
These small steppers are a great way to get things moving, especially when positioning and repeatability is a concern. Whe…
These are a pair of basic, 65mm wheels with black rubber tires. These wheels are the same ones designed to fit onto DAGUs rig…
The PQ12 series of micro linear actuators are ideal for applications requiring precise positioning and compact size. Weighing…
Robots are fun, and Arduinos are easy. So wouldn't it be nice if there were a kit that included everything you need to get yo…
Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is able to take in 6 volts and deli…
Here, for all your mechatronic needs, is a simple, high quality continuous rotation servo motor. This servo is able to take i…
Have you ever wanted to control the flow of a liquid using your computer or microcontroller, but didn't know how? Well, here'…
The SparkFun AutoDriver board is based on the STMicro L6470 dSPIN stepper motor driver. This powerful chip allows you to cont…
The Auto pHAT is an all in one package that focuses on quickly adding robot functionality and advanced support to your Raspbe…
The ProDriver makes it easy to start developing with the Toshiba TC78H670FTG bipolar stepper motor driver IC.
A vibration motor! This itty-bitty, shaftless vibratory motor is perfect for non-audible indicators. Use in any number of app…
The :MOVE mini MK2 Buggy Kit from Kitronik provides a fun introduction to robotics using the micro:bit.